I know this reply is late to the party but you mentioned you already have Dell servers and you said you really just want a 2.5" JBOD. Why not look at the Powervault MD1220? It basically exactly what your looking for and honestly extremely low cost. I've picked up a couple on eBay for $200/EA...
I've glanced at the CG 100-0 pool and was like holy hell. Haven't looked lately but I swear I saw one approaching 8PB. That is just insane.
Assume your at the 1PB mark as well? If so we need to chat. I would love to see your setup. I'm still moving things around but I run all my disks in Dell...
I'm still mining Burst and holding everything. So the current ROI is meaningless to me. Currently at 848TB. Received another 288TB of drives this week so those are plotting now. So I will be joining the 1PB club shortly.
I'll stick with my ATX PSU's for mining. I have nothing against the HP server PSU's I see other peeps using but I'm not trusting $6,000+ worth of GPU's to some power breakout board coming from the same place the craptastic risers come from.
I'll either run less GPU's per chassis (assuming I...
Just noticed today Rosewill has Revision C out aka RSV-L4000C which now has three front mounted 120mm fan brackets from the factory as well as a redesigned rear panel getting rid of the expansion slots and adding more fan slots.
Would still love to see dual PSU support as I also run 1080 TI's...
Haha. I've used this specific model for years. I only needed the half height cards with 8 ports, but at the time I bought my first ones well over a year ago the 16e's were literally half the price for double the ports. So I started just building JBOD chassis and using these cards instead.
I've...
I actually bought some of those @ $34 myself before I saw this thread. It was also suggested to me on Amazon and I thought: yep, I believe I need 3 of those.
Sent from my iPhone using Tapatalk
I agree about the fans, in the past when I bought the Rosewill L4500 the first thing I did was remove their garbage fans and replaced them with Deltas.
I am curious why they went the 5x80mm vs the 3x120mm fan wall their chassis usually come with. Im sure they have their reasons and it may...
Too bad they only went halfway and left all the pcie slots you won't need rather than dual PSU mounts.
This would defiantly be easier than modding one yourself. I use 1080 TI's so dual PWS is a must. Not just for the wattage but the number of connections. I would like to buy some Gray Matter...
One point I can offer on the Rosewill chassis is they are not good for vibration. In my specific use case I wanted to test a Rosewill L4500 against my 2U Chenbro 12 bay hot swap chassis. Just wanted the same drive count but a much quieter chassis.
I had read about the Rosewill chassis not...
Looks like just about everyone is out of stock. Only piece of advice I can offer is I had ordered a couple rail sets for a RM23212 and then everyone went out of stock and the item was discontinued. What I found out is "King Slide" which is who makes a lot of their rails changed the part number...
I may be way off base here but it sounds like you were looking at the 24 bay SM chassis with SAS2 backplane if they were showing up that high. Since the Rosewill will hold 12 drives the SM equivalent to look at is the 826. It will be nowhere near $800. They used to run sub $300 on eBay with the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.