Recent content by Chomes

Received my memory, perfect pacacking and memtest passes smoothly. Many thanks!

Just got myself 24 x8GB for my homelab :D More VMS :)

PM sent

Got the 4 SSDs, all perfect. All tested, about to put them into use.

Pm sent!

My bad, I forgot to check the date of the original message..

I would be interest on one depending on the price.

Perfect, I thought they were selling just the low profile replacement. Thanks!!

Did you purchase an extra bracket in low or high profile? If it is high profile where have you find it? Thanks.

If you check properly it gets the power from the 12V, however, on the molex side its only 5v. As is it is connected and with the ground cables.

You can use the 2 OPT_12V close by the PCIE_RISER, you just need a 4 Pin Molex To P4/64 Bit ATX 12v Anything like this will get you a molex, and then you can use a splitter form molex to SATA.

You can flash the FRU and update the information, but there is no benefit. It´s just for the information that appears on the BMCconsole.

----------- My plan is to try to get the systems fans to be at the lowest speed ,before triggering the low critical thresold around 2100 and increase the speed when temperature increases.

***I'm not responsible of any damage done to your system, proceed at your own risk**** ***Remember to check on the temperatures, it works for me but maybe it does not for your system*** If you use a text compare with the 2 files you can see the changes on the Global Step Curve Extract the file...

The file i'm editing is S2600GZ.sdr , it´s part of the bios flashing, step 4.. You only need to flash the SDR not the FRU.