RevertSP failed. Revert is not supported.
Revert is not supported with or without the psid.
Tried sanitize blockerase and it failed.
No luck with sedutil either:
Switched to a SAS HBA away from the fibre channel setup. Ran the smartctl command and got some additional SAS info.
Connected to the SAS HBA, some additional info and features are reported by SeaChest_Security
The msecli psid reset command still reports "This command is not supported for the...
S650DC, specifically the MTFDJAK800MBS. Sadly the PSID revert won't run.
msecli -X -P -p xxxxxxxxxxxxxxxxxxxxxxxxxxxx -n /dev/sg4
This command is not supported for the drive
Copyright (C) 2019 Micron Technology, Inc.
Thanks kdub. Now we have more info than before. Still stuck at 528. Have not tried the PSID revert, sedutil or camcontrol but can work on it more within the next few days. No RAID controller involved. The drive is in a disk shelf connected via QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI...
I picked one up. Tried a few things but nothing worked. Let me know if you want me to try something else.
Here is what I tried:
sg_format -format --size=512 --fmtpinfo=0 /dev/sg4
resulting in:
bad argument to '--fmtpinfo', accepts 0 to 3 inclusive
./SeaChest_Format_140_11923_64 -d /dev/sg4...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.