Hi all
I am in the market for a cost effective solution for an MFP color laser printer with copy, scan and duplex function + wifi.
THere are many in the market right now but the ongoing costs are a rip off. The toner costs are stupid and in my opinion not worth it. I am happy to buy a used one...
I am suddenly having some major issues with my unraid build and seriously thinking about changing the components from AMD to intel. Anyhoo, thats a subject for another thread.
Currently the system is powered on and does not boot or post but and the fans are running slow and then fast. They are...
Just to add, this is my primary nic on the PC. I also have a built in 1GB intel nic on the motherboard which I only use for WOL. This is for everything else.
HI Layla
Thanks so much for your reply. Here is the config for the areas you asked me to check
Nothing was changed on the switch. It is a brocade switch but has not been touched for over a year.
A sine sunny day, this nic desicded to assign itself IPs outside the network and does not connect to the DHCP anymore. Even after manually assigning an IP address, it does not connect. I dont know what caused this or how to fix this. I have reinstalled the Connect X 3 VPI drivers and also reset...
I know weird question in these times
Any ideas on where I can buy a new msrp 3080 in the US? I just need to learn some tricks on how to source one. I can see places please vest buy have them listed for $699 but sold out.
Are you guys putting bots on certain pages?
Is there a website where I...
Current setup
I have a very competent over-specced PC being seriously underused.
Ryzen 9 3950X
ROG-Strix X570 F-Gaming mobo
64GB DDR4
Asus NVidia 1080Ti
2TB PCI gen 4 NVME
Custom water block etc etc with 3 radiators sitting inside PHANTEKS PH-ES518XTG_DBK01
1200w Revolt X Platinum PSU...
I have been trying to update the SAS3008 firmware on this as advised on Unraid forums, but no one knows how to do it for this mobo.
Does anyone have any experience with this? I just need a step my step. I could not located the drivers on the broadcom site either.. nothing that matches SAS3008...
Thank you Virtuguy
Yes, I read about this recently. I do need to do some optimsation on BI including what the new version offers along with motion trigger happening at the camera level with onvif providing the necessary data to kick off recording. I guess I could work on that on the current...
Hi, i know this is a super old thread, but I have been reading with interest. I have similar requirements but I am at a loss because I have an additional software to deal with Blue Iris IP Cam software.
@IamSpartacus if you have had any luck with your build, I am interested to hear your...
Hi guys, apologies for the long post, but I want to provide a full picture to get the best possible advice.
In my research phase right now, and unfortunately I have already been trigger happy with a few components which I am regretting.
I currently have a number of PCs running doing a...
Thanks for your help. Yes well within 5m for all gear across my tiny little home office so all good there.
Which item can I go and purchase then? I just need another compatible cable and dacs right?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.