ES Xeon Discussion

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

RolloZ170

Well-Known Member
Apr 24, 2016
5,155
1,548
113
Interestingly another eBay seller selling the same chip confirms compatibility with AsRock X99 motherboards and some standard C612 mobos. If so this chip is truly a little freak.
OK i see, its the japan one.
if you have luck u get one without scratches on the gold side (but they work)
Foto0082.jpgFoto0081.jpg
i got one with and one without.
less power than the 2699 is because only 120w TDP and cutted turbo bin's on ES xeons.
(except the 2630Lv4 ES - this has same stepping and turbo than the retail)
 
Last edited:
  • Like
Reactions: UTDZ

Ponury Typ

Member
Oct 28, 2015
57
12
8
32
Any update on VT-d on this ES E5-2630L ? If it works i would love to grab one to my new node in homelab.
 
  • Like
Reactions: Vcxz

RolloZ170

Well-Known Member
Apr 24, 2016
5,155
1,548
113
Any update on VT-d on this ES E5-2630L ? If it works i would love to grab one to my new node in homelab.
Any tools(cpu-z,HWinfo...) shows it ON, but i can not check it with EXSi or something else.
IMHO VT-d ist a function of chipset and BIOS, the CPU must only have VT.

Any easy way to check it ?
 
Last edited:

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,625
2,043
113
So far my ultra-cheap V4 ES is working. It has Vt-D and it is working. I passed through, and am using Perc310/LSI HBA just fine, also passed thruiogh intel 10G nic but that has issues w/esxi (common). For <$130 for 12 cores I'm not complaining.
 

Mkmdad

New Member
Jun 13, 2016
18
3
3
63
I was thinking of getting this E5-2680 v4 ( Intel Xeon Processor E5-2680 v4 Broadwell-EP CPU 2.2GHz 14-Core 35M 120W QHV7 ES )
It is stepping L0 /QHV7 - so not the first test sample.
A previous post mentioned to look at CPU-World, but I cant seem to figure out how to find info on that specefic stepping.
Any thoughts on this sample?
CPU-world does not seem to have much info when it comes to V4 ES
Many of ther E5-26xx V4 ES are L0. I too would like to know how good or bad they are.
 

Lasse Bjerre

New Member
Jun 13, 2016
5
2
3
47
QH is older, QK is retailish
OK thanks - so I guess the risk is a bit high.
The seller has tested it in the SuperMicro Board I'm going to use, and gives a 30 day money back guarantee, so I'm going to give it a try.
I will report back.
 

Patriot

Moderator
Apr 18, 2011
1,450
789
113
OK thanks - so I guess the risk is a bit high.
The seller has tested it in the SuperMicro Board I'm going to use, and gives a 30 day money back guarantee, so I'm going to give it a try.
I will report back.
As far as I know... those are the only 2 broadwell steppings....
And QH is A0 ... or L0 or ... L0 is the Mcc models of A0... B0 would be M0 ... etc.
 

Lasse Bjerre

New Member
Jun 13, 2016
5
2
3
47
As far as I know... those are the only 2 broadwell steppings....
And QH is A0 ... or L0 or ... L0 is the Mcc models of A0... B0 would be M0 ... etc.
I apologize for the dumb question - what is an Mcc model (google did not help me).
And is it likely to work? :)
 

Patriot

Moderator
Apr 18, 2011
1,450
789
113
I apologize for the dumb question - what is an Mcc model (google did not help me).
And is it likely to work? :)
So with sandy through haswell... there was 3 seperate dies Hcc high core count, medium and low. You can Identify by the bottom transistor layout... if you are crazy like me...
Likewise they had 3 different stepping letters what were equivalent.
A-C was on the HCC, Medium got L/M and Low got R...
iirc for broadwell we have A0=L0, B0=M0
only Hcc and Mcc U layout is Hcc, L is Mcc.
 

Lasse Bjerre

New Member
Jun 13, 2016
5
2
3
47
So my E5-2680v4 Engeneering Sample arived.
It has been running AIDA64 stress test stable for the last 5 hours.

Any suggestion as what to run to test if there are any bugs in the CPU?
 

Attachments

  • Like
Reactions: Chuntzu

Mkmdad

New Member
Jun 13, 2016
18
3
3
63
Hwinfo and look under cpu.
Compare the instruction sets with the production ones on intel's Web site.
 

skai

New Member
Jun 21, 2016
1
0
1
50
and what about QHUZ stepping?.Didnt get it clear from what u posted
 
Last edited:

RolloZ170

Well-Known Member
Apr 24, 2016
5,155
1,548
113
So with sandy through haswell... there was 3 seperate dies Hcc high core count, medium and low. You can Identify by the bottom transistor layout... if you are crazy like me...
Likewise they had 3 different stepping letters what were equivalent.
A-C was on the HCC, Medium got L/M and Low got R...
iirc for broadwell we have A0=L0, B0=M0
only Hcc and Mcc U layout is Hcc, L is Mcc.
E5-2609 v3 is Stepping M1 but 6 cores is LCC.
Or has Intel used a MCC chip with deaktivated cores ?
confusion
 

imchipz

Member
Apr 18, 2016
38
2
8
40
Hows it going, still stable? Thinking of buying one myself but not sure how to ensure it's stable. Is there some set of benchmarks that test almost everything that the CPU can do?