FS: Fujitsu XG2600 SFP+ Switch

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

NSKA

Active Member
Nov 17, 2015
209
27
28
28
Hi All,

I purchased a XG2600 a little while back, its a 26 SFP+ port switch. It performs alot better than the LB6M from what I have seen aswell, its meant for a larger operation. The fujitsu I have comes with 2 fan cards and dual PSUs. I am looking for around 900 for it, I'm also willing to trade for ubiquiti switches because I need two of those haha. I will ship to any country etc if your paying shipping, located @ 01945. Here are some pics and the information.

Amazon Cloud Drive

https://www.fujitsu.com/us/Images/xg2600-datasheet-final.pdf

Thanks for looking,
Nils
 

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,625
2,043
113
Hi All,

I purchased a XG2600 a little while back, its a 26 SFP+ port switch. It performs alot better than the LB6M from what I have seen aswell, its meant for a larger operation. The fujitsu I have comes with 2 fan cards and dual PSUs. I am lookin...
How so?
 

aero

Active Member
Apr 27, 2016
346
86
28
54
I've used many xg2600s in an enterprise setting and can say they are great layer 2 switches. Very reliable, and low latency.


No igmp v3 snooping though, and lacking layer3.


Edit: I erased a comment about small limit of registered multicast groups. It was 200 on the 224 model, 2000 on the xg2600, which is pretty good.
 
Last edited:

NSKA

Active Member
Nov 17, 2015
209
27
28
28
To start it's a real aggregation switch, that quanta stuff is just eh. As @aero its incredibly low latency and incredibly reliable. At the time it came out that was obviously for a hefty price tag of 18,000$.
 

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,625
2,043
113
I see.

Sure sounded like you had this sold on Reddit a month ago.
 

NSKA

Active Member
Nov 17, 2015
209
27
28
28
@T_Minus I did, I had 2 to be sold. I kept one for myself which is what I am getting rid of now.
 

Eddie Collado

New Member
Mar 7, 2019
3
0
1
Hi All,

I purchased a XG2600 a little while back, its a 26 SFP+ port switch. It performs alot better than the LB6M from what I have seen aswell, its meant for a larger operation. The fujitsu I have comes with 2 fan cards and dual PSUs. I am looking for around 900 for it, I'm also willing to trade for ubiquiti switches because I need two of those haha. I will ship to any country etc if your paying shipping, located @ 01945. Here are some pics and the information.

Amazon Cloud Drive

https://www.fujitsu.com/us/Images/xg2600-datasheet-final.pdf

Thanks for looking,
Nils
 

Eddie Collado

New Member
Mar 7, 2019
3
0
1
Hi. I know this thread is a couple of years old. But do you still have a Fujitsu XG2600 that you want to sell? I would be interested.
 

747builder

Active Member
Dec 17, 2017
112
58
28
how picky about optics and DAC cables is this?

firmware updates for the switch available without a support contract?

CLI cisco like or something else?
 

Eddie Collado

New Member
Mar 7, 2019
3
0
1
I do need the unit populated with 26 SFP+. But if you don't have them, that's ok. I can get them. I don't need cables. I'm a reseller and my customer will just be replacing an older unit. Let me know your best price. Thanks.
 

TrickyRicky65

New Member
Apr 19, 2019
2
0
1
Hey everyone. I have a couple of xg2600 switches that I am trying to 'Reset to Factory Defaults'. I've managed to connect a windows 10 laptop to the device and successfully get the 'Login' prompt. I found a process that says to hold the [#] key after powering on the device to reset it but the device just acts like I haven't pressed anything and proceeds to the 'login' rather than the 'preparing to boot' message. Any guidance would be appreciated! Thanks in advance. Nevermind, i figured it out. :)
 
Last edited: