H310 $35

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

rnavarro

Active Member
Feb 14, 2013
197
40
28
Awesome!

In for 4 @ $35 - Seller accepted

Going to drop these in my C6100 cluster to get a bit moar speed for my vsan :D
 

whitey

Moderator
Jun 30, 2014
2,766
868
113
41
Good deal anything less than $40 or $5 per port hookup in my book. I have WAY too many of these HBA's, three 9211's, two H310's, two 9210's. Yeah I think I got all of that out of my system thank goodness.
 

nthu9280

Well-Known Member
Feb 3, 2016
1,628
498
83
San Antonio, TX

whitey

Moderator
Jun 30, 2014
2,766
868
113
41
Make sure you are using the older P7 version of sas2flash first. It took me a while to figure that. I was afraid that I might have bricked it.

@whitey has pictures of the steps in a recent post here with version hilighted.
Tru dat! :-D Learned that lesson LONG ago, I have the upgrade sequence engrained in my memory now for almost all 2008 card variants.
 

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,625
2,043
113
I got mine on Saturday.

Packaging was TERRIBLE.

They were packed 3 in a single Priority Envelope with 1 layer of bubble wrap around them!!!
1 8087 connection was bent, but I straightened it out.

going to be testing these ASAP
 

rubylaser

Active Member
Jan 4, 2013
846
236
43
Michigan, USA
I got mine on Saturday.

Packaging was TERRIBLE.

They were packed 3 in a single Priority Envelope with 1 layer of bubble wrap around them!!!
1 8087 connection was bent, but I straightened it out.

going to be testing these ASAP
Mine were also packaged terribly (the same way). I had one bent 8087 connection as well, but I was able to straighten it out. I have tried to check on both of these cards with both megacli and sas2flash and neither one shows any adapters present. Also, I don't get the OptionROM loading screen either during bootup for either card. I'm not sure if these cards are duds or have been flashed incorrectly.
 

zeynel

Dream Large, Live Larger
Nov 4, 2015
505
116
43
48
Mine were also packaged terribly (the same way). I had one bent 8087 connection as well, but I was able to straighten it out. I have tried to check on both of these cards with both megacli and sas2flash and neither one shows any adapters present. Also, I don't get the OptionROM loading screen either during bootup for either card. I'm not sure if these cards are duds or have been flashed incorrectly.

nthu9280 said: Make sure you are using the older P7 version of sas2flash first. // maybe the older version of sas2flash will detect the Cards
 

MatrixMJK

Member
Aug 21, 2014
70
27
18
55
@rubylaser, are you trying to flash these on a motherboard you have used LSI cards on before? Just checking as I had forgotten about the PCIe problems these have on most Gigabyte and other non-server motherboards and not showing up in BIOS or utilities. Thought I had a couple of failed cards too, but in a SuperMicro board they flashed fine (mine were not from this deal, it was a couple of 9201-16e I think from a Compellant off of ebay.)