Intel Xeon E5-2670 Deal and Price Tracking

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

jmck

Member
Apr 4, 2013
90
28
18
Anyone else that got a P4216XXMHGR, did you get a key for the front panel door? I've checked all the bags and inside the case but I can't find a key.
 

marcoi

Well-Known Member
Apr 6, 2013
1,532
288
83
Gotha Florida
some pics of P4216XXMHGR Server Chassis 4U Rack case so far. The build will start next week when I get the case.


BTW can someone start a page documenting the Intel build outs based on S2600CP board? keep all this information in an easy to find format?

3rd note anyone water cool the CPU with an AIO unit? Right now there are two large fans in the middle of the case. If i can replace them with two AIO to cool the cpus and some low RPM fans that would be ideal.

2016-03-17 17.00.04.jpg 2016-03-17 17.05.32.jpg
 
Last edited:

slatfats

Member
Nov 3, 2014
42
15
8
Brisbane, Australia
Following up on my earlier post, I put in an offer on a 2660 from vgacpu2011 of $50 (asking $58), and it was accepted straight away, no counteroffer. There might be some good value to be had there, if people are OK with slower clock speeds.
 

workingnonstop

Active Member
Feb 24, 2016
233
63
28
38
Following up on my earlier post, I put in an offer on a 2660 from vgacpu2011 of $50 (asking $58), and it was accepted straight away, no counteroffer. There might be some good value to be had there, if people are OK with slower clock speeds.
Great price - wonder if he'll do for others or if he knows he owes you for the earlier mistake and is trying to avoid negative feedback

Edit - $7 shipping puts a $50 price right on top of where I picked up my last set, unless you also got him to waive shipping? also be careful as he has multiple steppings, some of which are the earlier without vt-d... Sr0kk has working, according to Google
 
Last edited:

slatfats

Member
Nov 3, 2014
42
15
8
Brisbane, Australia
Great price - wonder if he'll do for others or if he knows he owes you for the earlier mistake and is trying to avoid negative feedback

Edit - $7 shipping puts a $50 price right on top of where I picked up my last set, unless you also got him to waive shipping? also be careful as he has multiple steppings, some of which are the earlier without vt-d... Sr0kk has working, according to Google
Thanks - I got the SR0KK stepping. It was 50 + 7 shipping, but I'll then be shipping it to Aus.
 

handruin

Member
May 24, 2015
51
15
8
I purchased two of the Intel P4308XXMFGN Server Chassis 4U 750W from the seller kalleyomalley on eBay and now that I'm trying to get an RMA/replacement on a defective PSU in one of the cases they've stopped replying to my messages from two days ago. Perhaps I should be more patient but their listing says 15 day warranty.
 

Dav

Member
Jan 20, 2016
47
3
8
41
well just got my EP2C602-4L/D16; installed one cpu and one stick of Samsung M393B1K70CH0-CH9 4gb, xfx ts 650 psu and the thing does not start /post; bmc led is just blinking

memory issues ? got some corsair vengeance and geil dragon ram i can try but those aint ecc

any ideas ?
 
Last edited:

marcoi

Well-Known Member
Apr 6, 2013
1,532
288
83
Gotha Florida
I purchased two of the Intel P4308XXMFGN Server Chassis 4U 750W from the seller kalleyomalley on eBay and now that I'm trying to get an RMA/replacement on a defective PSU in one of the cases they've stopped replying to my messages from two days ago. Perhaps I should be more patient but their listing says 15 day warranty.
do you have the link to the TA/RMA for the case?
 
Last edited:

desle3d

New Member
Mar 13, 2016
1
0
1
44
Did a quick overclock on the E5-2670 V1 SR0KX
Edit: I just realized I was running Real Temp instead of Real Temp GT that is why only 4 cores are showing :facepalm:

Cpu: E5-2670 V1 SR0KX
Mobo: Asus X79 Gene IV
Ram: 4x8gb Ripjaws X 1600mhz (@1333)
Cooler: DeepCool Assassin

Stock
Load(all cores): 3ghz
Load(most cores): 3.3ghz

Overclock 107.2 BCLK stock voltage
load(all cores): 3.21ghz
load(most cores):3.53ghz

All Stock



107.2 BCLK Overclock

 
Last edited:

Dav

Member
Jan 20, 2016
47
3
8
41
alright its alive

getting some high temps tho, about 50c with smart fan on; don't know if its just the cheap ass fan (enermax ets-n30 2) or termal paste (halnziye); will need changing
 

rubylaser

Active Member
Jan 4, 2013
846
236
43
Michigan, USA
alright its alive

getting some high temps tho, about 50c with smart fan on; don't know if its just the cheap ass fan (enermax ets-n30 2) or termal paste (halnziye); will need changing
Is the 50C under load or at idle? Idling at 50C is definitely high. If it's under load, that's not bad at all.
 

Dav

Member
Jan 20, 2016
47
3
8
41
first glance in bios, on max throttle it gets to about 45C ; weird tho cpu fans are very cool on touch

shouldn't skimp on fans, i never learn

 

rubylaser

Active Member
Jan 4, 2013
846
236
43
Michigan, USA
first glance in bios, on max throttle it gets to about 45C ; weird tho cpu fans are very cool on touch

shouldn't skimp on fans, i never learn

If by max throttle gets to 45C means that is the temperature under a full load (like AIDA64 would put on the whole system), those temps are great. I have two Supermicro SNK-P0050AP4's and each CPU gets to around 60C in my system. At idle, my temps are in the low 30'sC.
 

Dav

Member
Jan 20, 2016
47
3
8
41
max throttle via bios fan settings. Did set both fans at 100%
haven't done any stress testing yet, will as soon my disks arrive but reading your data mine will probably be in the 80C range

should go with a cooler master as someone suggested here, i stink choosing a decent cpu fan, but dammit thy should at least be better that Intels termal solution
 

marcoi

Well-Known Member
Apr 6, 2013
1,532
288
83
Gotha Florida
I believe I saw the nic mounting hardware included with the 4300 series Intel case that I ordered. I don't recall seeing the ribbon cable though but maybe it was in one of the bags. The cable definitely was not included in the package for the AXXRMM4R Lite box. I was surprised that the unlock key was so tiny.
does anyone have the cable partnumber for the rmm4 nic? It didnt come with the intel case.