Small update on v4 testing:
Thank you for taking time to test it! Looking forward to your report
Xubuntu 22.04: works out of the box
Windows 11: need to install network driver, chipset driver and serial driver and all yellow exclamation marks are gone in device manager. It is not super fast and feels slower than my desktop with 12th gen i7 (as expected), but it runs Win 11 quite fine.
Windows 10: not yet tested
OPNsense 22.7: works out of the box and stable, I did import the config from my Topton/Kingnovy N6005 with Changwang v2 board
HWProbe works fine, with the Changwang v2 I got an upload error (BSD and Linux)
Included fan (80x80x10) is a bit noisy but does the job.
Buzzer is way louder than any other device I have owned so far. In fact, it is too loud.
The unit does not like it too much if you disable Intel ME, there are 2x three short beeps at POST if disabled.
If yours is straight from the factory, can you check your BIOS revision & date, please? I didn't write down mine but think I was already on JK4L-V104 9th /08/2022 before flashing.
BIOS Date out of the box is 07/30/2022, 11:54:03,
JK4LV10
3
What does your device show?
RAM (Kingston) and SSD Kingston (cheapish NV1) work fine.
So far I'm pretty satisfied with the device, better than the KingNovy/Topton with Changwang v2 Board.