Canada [NEW LOT] ASROCK X7P-MB REV. 1.02 LGA3647 FPGA C626 SR3HH

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

NablaSquaredG

Layer 1 Magician
Aug 17, 2020
1,320
800
113
Could you take a closer pic of that Inphi chip please? I'd be interested to find out what that is, as I only know Inphi memory buffer chips.
 

NablaSquaredG

Layer 1 Magician
Aug 17, 2020
1,320
800
113
Interesting, that's a "Dual 15 Gbps PHY with 4-Port CDR, EDC, and Backplane Support" according to the datasheet.
 

Emtu

New Member
Nov 14, 2014
9
5
3
I just checked and those dual Xeon D boards have two of the same Inphi chips near the SFP+ as well. I suspect they're handling the 10G networking.
 

Vit K

Member
Feb 23, 2017
88
30
18
Should be regular Xeon, because of C62x chipset, and Phi has C61x chipset. You just need to mount narrow cooler on it. Of course I might be wrong.
 

Attachments

bob_dvb

Active Member
Sep 7, 2018
214
116
43
Not quite London
www.orbit.me.uk
LTT did a review of Knights Landing in 2017:

Given these are C626 and the SR3HH designation, I would bet they are just Skylake-SP as well as Cascade Lake-W and Cascade Lake-SP compatible.

If they are Akamai boards they won't be Phi either in my opinion.

The RAId pin header is for a key which enables more raid options in the bios, they'd are standard headers, my Supermicro has one just like. Tray? Probably led indicators, gpio, for storage identifiers to allow them to identify whichever drives to change. If they are CDn storage nodes then they could have theirs party labour on site doing drive swaps in remote locations. Being able to highlight drives needing changing is important, to avoid mistakes.
 

ijohnny

New Member
Jul 11, 2021
14
2
3
Can you provide me with bmc and firmware through google network disk? Thank you

My ipmi cannot be accessed and one of the network ports cannot be used.
 

maxermaxer

Active Member
Oct 28, 2016
289
48
28
48
Guys, I can shed some lights here since I know Chinese. This board is being sold on 2nd hand market named "XianYu". According to the seller this is a 4-port 10Gbps LAN motherboard:
- X722 * 4
- X540 * 2
nvme *2
Supports 50Gbps LAN CARD
Below are the photos seller posted: (I know I am stealing the photos. :p)

Photo-2022-02-15-09-02-530473.jpgPhoto-2022-02-15-09-02-580474.jpgPhoto-2022-02-15-09-03-050475.jpgPhoto-2022-02-15-09-03-110476.jpg

This photo might be interesting to know what hardware works with this MB:
Photo-2022-02-15-09-03-140477.jpg

It says the LAN card below works with this MB
Photo-2022-02-15-09-03-460478.jpgPhoto-2022-02-15-09-19-as0479.jpgPhoto-2022-02-15-09-19-as0480.jpg


There is another hard-core user posted his experience with the MB. I will try to translate it below. (Text in bracket is what I add)

This motherboard comes with C626 chipset, it supports 8175 and 8171 CPU
There are a few issues:
1) BIOS version is old, it supports 240W TDP CPUs (they call them Amazon CPU)
2) The BMC chip comes with IPMI but I cannot access without access right (do they mean password?)
3) Onboard X722, one port doesn't work, need NVM firmware (need to find it yourself)

eATX form factor, single socket c626
Onboard X722, Dual 10G X722
Onboard X722, Dual 1G X722
Dual m.2 slot, 22110 length
Onboard OCP socket, can connect to OCP lan card
No VGA port
Onboard dual 8643
Need ITX display card (I am not sure what ITX graphic card means)

----
So my questions are:
1) Does this work with Xeon Phi?
2) How to boot it up without the standard power connector? (Power On, Reset, LED+/- etc.)
 
  • Like
Reactions: Vit K

RolloZ170

Well-Known Member
Apr 24, 2016
5,158
1,549
113
may be interesting for some hardware enthusiasts.
but not suited to have a cheap motherboard, i.e. in the EU this will be $531 USD (468 EUR)
i can get a EPC621D8A for 400 EUR, warranty/support included.
 

ijohnny

New Member
Jul 11, 2021
14
2
3
maxermaxer,帖子:327044,成员:9520 said:
之所以叫大家懂中文,所以我可以在这里因为我。
- X722 * 4
- X540 * 2
nvme *2
支持50Gbps网卡
下面是发布者的照片:(我知道我在看照片。:p

View attachment 21666View attachment 21667View attachment 21668View attachment 21669

这张照片可能很有趣,想知道这张 MB 硬件的内容是什么:
View attachment 21670

它下面说的 LAN 卡可以与此 MB 配合使用
View attachment 21671View attachment 21672View attachment 21673


还有另一位铁杆发布了他对 MB 的体验。将在下面的翻译中试用一下。(我笔中的文字是我添加的)

此主板自带C626芯片组,支持8175和8171 CPU
有几个问题:
1) BIOS版本较旧,支持240W TDP CPU(他们称其为Amazon CPU)
2)BMC芯片自带IPMI,但是没有访问权限就无法访问(是密码吗?)
3)板载X722,一个端口不行,需要NVM硬盘(需要自己找)

eATX外形尺寸,单插槽c626
载板X722,双10G X722
载板X722,双1G X722
双m.2插槽,22110长度
载板OCP网卡,可连接OCP网卡
没有VGA端口
载板双8643
需要ITX显卡(不知道ITX显卡的英文)

----
所以我的问题是:
1)这适用于至强融核吗?
2)如何在没有标准电源连接器的情况下启动它?(在、启动、LED+/-等)
[/引用]

你看到的是发表的,但你 1.5k 那个我的系列称我看的是骷髅交叉骨
一个口是ipmi口但应该无法访问bmc
子板板载ocp接口最高可以支持100g ocp网卡可以这样理解
主板bios有bug 这个无法访问bmc 对8175 8222 8275 8259 这个亚马逊定制u都支持可以这样理解
 

ijohnny

New Member
Jul 11, 2021
14
2
3
maxermaxer,帖子:327044,成员:9520 said:
伙计们,因为我懂中文,所以我可以在这里发光。此板在名为“闲鱼”的二手市场出售。据卖家介绍,这是一块 4 端口 10Gbps 局域网主板:
- X722 * 4
- X540 * 2
nvme *2
支持50Gbps网卡
以下是卖家发布的照片:(我知道我在偷照片。:p

View attachment 21666View attachment 21667View attachment 21668View attachment 21669

这张照片可能很有趣,想知道这个 MB 的硬件是什么:
View attachment 21670

它说下面的 LAN 卡可以与此 MB 配合使用
View attachment 21671View attachment 21672View attachment 21673


还有另一位铁杆用户发布了他对MB 的体验。我将尝试在下面翻译它。(括号中的文字是我添加的)

此主板自带C626芯片组,支持8175和8171 CPU
有几个问题:
1) BIOS 版本较旧,支持 240W TDP CPU(他们称其为 Amazon CPU)
2)BMC芯片自带IPMI,但是没有访问权限就无法访问(是密码吗?)
3)板载X722,一个端口不行,需要NVM固件(需要自己找)

eATX 外形尺寸,单插槽 c626
板载 X722,双 10G X722
板载 X722,双 1G X722
双 m.2 插槽,22110 长度
板载OCP插座,可连接OCP网卡
没有VGA端口
板载双8643
需要ITX显卡(不知道ITX显卡是什么意思)

----
所以我的问题是:
1)这适用于至强融核吗?
2)如何在没有标准电源连接器的情况下启动它?(开机、复位、LED+/- 等)
[/引用]

他应该可以带f后缀的cpu,但没有尝试
8176f或者8160f应该可以

atx电源就可以带电自动重启 io有重启
我目前在88171和8171的热卖可以带国际
 

ijohnny

New Member
Jul 11, 2021
14
2
3
atx电源就可以带电自动重启io有重启
我现在8177缺通道的可以和主板一起卖国际需要可以pm我

你看到的是的,但是你15k的那个我的系列称我看的本质骨。
一个口是ipmi但无法访问bmc
板载ocp接口可以支持100g ocp网卡这样最高可以理解
主板bios 有bug 这个无法访问 bmc 对8175 8222 8275 8259 这个亚马逊定制u都支持可以理解

 
  • Like
Reactions: Vit K