Hehey Folks
Ok i come directly to my situation.
What's the HW:
Mainboard: Supermicro H12SSL-CT ( REV: 1.01 )
CPU: AMD EPYC 7232P
RAM: 2x Samsung 8G 2Rx8 PC4-2133P-RE0-10-MB1 ( M393A1G43DB0-CPB2Q S )
If i put all power cables on ( both cpu and the big 24 pin) the POST stops at:
DXE--USB Initialization and right on the IPMI/BMC screen/console is the code 62.
The 0x62 is "Installation of the South Bridge Runtime Services", this is the end of the "POST"-road.
I've tried to put the RAM sticks solo or in any different kind on the board, i've tried to CMOS reset and factory reset and nothing brings me a step further.
So i downloaded the BMC and BIOS software and first i updated the BMC from 01.00.34 to 01.00.35 and it work, the new versions was there.
Then i updated the BIOS from 2.01 to 2.03, after the update process, the device does a reboot and ... ?!? it is still BIOS 2.01..
So, after reboot 3 times, i have to ask for help, the POST process stops still at (DXE--USB Initialization / 62) and i can't update the BIOS, the proces of the updates goes really smooth, but after it is still 2.01.
This is the data under BMC -> Firmware -> Inventory:
BIOS BIOS Date: 06/02/2021 Ver 2.1
BIOS Backup Not Present
BIOS Golden BIOS Date: 06/02/2021 Ver 2.1
BIOS Staging BIOS Date: 10/20/2021 Ver 2.3
BMC 01.00.35
BMC Backup Not Present
BMC Golden 01.00.34
BMC Staging 01.00.35
CPLD Motherboard F0.A6.44
I hope someone can tell me, what i'm doing wrong.
Best regards from Switzerland (sorry about my horrible english)
Andi
Ok i come directly to my situation.
What's the HW:
Mainboard: Supermicro H12SSL-CT ( REV: 1.01 )
CPU: AMD EPYC 7232P
RAM: 2x Samsung 8G 2Rx8 PC4-2133P-RE0-10-MB1 ( M393A1G43DB0-CPB2Q S )
If i put all power cables on ( both cpu and the big 24 pin) the POST stops at:
DXE--USB Initialization and right on the IPMI/BMC screen/console is the code 62.
The 0x62 is "Installation of the South Bridge Runtime Services", this is the end of the "POST"-road.
I've tried to put the RAM sticks solo or in any different kind on the board, i've tried to CMOS reset and factory reset and nothing brings me a step further.
So i downloaded the BMC and BIOS software and first i updated the BMC from 01.00.34 to 01.00.35 and it work, the new versions was there.
Then i updated the BIOS from 2.01 to 2.03, after the update process, the device does a reboot and ... ?!? it is still BIOS 2.01..
So, after reboot 3 times, i have to ask for help, the POST process stops still at (DXE--USB Initialization / 62) and i can't update the BIOS, the proces of the updates goes really smooth, but after it is still 2.01.
This is the data under BMC -> Firmware -> Inventory:
BIOS BIOS Date: 06/02/2021 Ver 2.1
BIOS Backup Not Present
BIOS Golden BIOS Date: 06/02/2021 Ver 2.1
BIOS Staging BIOS Date: 10/20/2021 Ver 2.3
BMC 01.00.35
BMC Backup Not Present
BMC Golden 01.00.34
BMC Staging 01.00.35
CPLD Motherboard F0.A6.44
I hope someone can tell me, what i'm doing wrong.
Best regards from Switzerland (sorry about my horrible english)
Andi