I hava several nas chassis,one is Micro server gen8 ,the chassis is very small,and I hava mod this chasssis to diy itx motherboard。but it is so small that there is not enough space to expand more other hardwares!
Later, I found lots of chassis, including Hp ml110 gen8,this chassis hava a 9cm fan to fit the eights hard drivers thermal,I am not satisfied。 So it was difficult to meet my silence demands and expansion requirements. I have asked a lot of people, in fact, many people have encountered the same problem on home nas diy chassis。
Now ,I hava DIYed a chassis that hava been closed to my main requirements。
The front panel。The blow show the thickness is 8mm
Use dell's hard driver bays
The io shield and pcie 。The power suppyl is 1u psu,two 12cm fans for 10 hard drivers。
The backplane,support U.2(pcie),SAS,Sata。The led's of bays will normally work where drive access and drive idle
The up floor,three 8cm fans for motherboard heat dissipation。
Now the diy nas has been running as my main storage server,if you hava any good idea for this nas make,please contact me the forums message box。Thanks
if you also want to own this case,contact me。
Later, I found lots of chassis, including Hp ml110 gen8,this chassis hava a 9cm fan to fit the eights hard drivers thermal,I am not satisfied。 So it was difficult to meet my silence demands and expansion requirements. I have asked a lot of people, in fact, many people have encountered the same problem on home nas diy chassis。
Now ,I hava DIYed a chassis that hava been closed to my main requirements。
The front panel。The blow show the thickness is 8mm
Use dell's hard driver bays
The io shield and pcie 。The power suppyl is 1u psu,two 12cm fans for 10 hard drivers。
The backplane,support U.2(pcie),SAS,Sata。The led's of bays will normally work where drive access and drive idle
The up floor,three 8cm fans for motherboard heat dissipation。
Now the diy nas has been running as my main storage server,if you hava any good idea for this nas make,please contact me the forums message box。Thanks
if you also want to own this case,contact me。
Last edited: