Ruckus Wireless Bootloader: 10.1.14T225 (Nov 15 2018 - 04:59:18 -0800)
Booted from partition 2
DRAM: Validate Shmoo parameters stored in flash ..... OK
ICX7150-12 (POE), PVT1
SYS CPLD VER: 0x4 Released Ver: 0xa
device 0 offset 0x0, size 0xc0000
Enter 'b' to stop at boot monitor:
device 0 offset 0x0, size 0xc0000
bootdelay: ===
Booting image from Primary
NAND read: device 0 offset 0x0, size 0x2000000
33554432 bytes read: OK
## Loading kernel from FIT Image at 70000200 ...
Using 'conf@1' configuration
Trying 'kernel@2' kernel subimage
Description: Ruckus Linux MN VER=08.0.80e
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x70213ff0
Data Size: 2184164 Bytes = 2.1 MiB
Architecture: ARM
OS: Linux
Load Address: 0x61008000
Entry Point: 0x61008000
Hash algo: crc32
Hash value: 29a83c27
## Loading kernel from FIT Image at 70000200 ...
Using 'conf@1' configuration
Trying 'kernel@2' kernel subimage
Description: Ruckus Linux MN VER=08.0.80e
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x70213ff0
Data Size: 2184164 Bytes = 2.1 MiB
Architecture: ARM
OS: Linux
Load Address: 0x61008000
Entry Point: 0x61008000
Hash algo: crc32
Hash value: 29a83c27
Verifying Hash Integrity ... crc32+ OK
## Loading ramdisk from FIT Image at 70000200 ...
Using 'conf@1' configuration
Trying 'ramdisk@1' ramdisk subimage
Description: Ramdisk -rootfs
Type: RAMDisk Image
Compression: lzma compressed
Data Start: 0x7042fd88
Data Size: 25430519 Bytes = 24.3 MiB
Architecture: ARM
OS: Linux
Load Address: 0x00000000
Entry Point: 0x00000000
Hash algo: crc32
Hash value: 960fb2cd
Verifying Hash Integrity ... crc32+ OK
## Loading fdt from FIT Image at 70000200 ...
Using 'conf@1' configuration
Trying 'fdt@3' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x7042db30
Data Size: 8607 Bytes = 8.4 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 6fc9a37b
Verifying Hash Integrity ... crc32+ OK
Loading fdt from 0x7042db30 to 0x65008000
Booting using the fdt blob at 0x65008000
Uncompressing Kernel Image ... OK
Using Device Tree in place at 65008000, end 6500d19e
Starting kernel ...
booting with 4.4 kernel
NAND Type: Micron NAND 2GiB (x 1)
PLATFORM MN
dd cmd: UBI
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 1040384 bytes from PEB 841:8192, read 1040384 bytes
UBIFS error (ubi0:0 pid 565): ubifs_recover_leb: corruption -3
UBIFS error (ubi0:0 pid 565): ubifs_check_node: bad node length 263218
UBIFS error (ubi0:0 pid 565): ubifs_check_node: bad node at LEB 1134:884736
magic 0x6101831
crc 0x87f8e43e
node_type 1 (data node)
group_type 128 (unknown)
sqnum 1378685144455
len 263218
key (4194457, xentry, 0x00205e)
size 335548416
compr_typ 1344
data size 263170
data:
00000000: d6 c1 c7 35 d4 a1 e1 f2 c1 d0 ef 02 7e 99 b9 63 4f 17 43 76 22 8a 8d f7 1e d1 49 19 d3 0b a3 60
[trimmed]
00025fa0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Unable to handle kernel paging request at virtual address f0ca1000
pgd = d0d14000
[f0ca1000] *pgd=86155811, *pte=00000000, *ppte=00000000
Internal error: Oops - BUG: 7 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 565 Comm: mount Not tainted 4.4.0 #1
Hardware name: BRCM XGS iProc
task: e51c2600 ti: d0c2c000 task.ti: d0c2c000
PC is at hex_dump_to_buffer+0x158/0x4d0
LR is at 0xd0c2db9a
pc : [<c0225670>] lr : [<d0c2db9a>] psr: 20000213
sp : d0c2db00 ip : 00000034 fp : d0c2db4c
r10: 00000020 r9 : c0432298 r8 : 00000020
r7 : f0ca0fff r6 : 00000010 r5 : 00000066 r4 : 00000083
r3 : 00000066 r2 : 00000030 r1 : 00000032 r0 : 00000031
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 12c5387d Table: 71d14059 DAC: 00000051
Process mount (pid: 565, stack limit = 0xd0c2c190)
Stack: (0xd0c2db00 to 0xd0c2e000)
db00: c0066134 c0065a4c 00000001 f0ca0ff0 00000061 00000000 00000020 00000020
[trimmed]
dfe0: b6e2d071 beab4a18 00051149 b6e2d078 80000230 beab4f18 00000000 00000000
Backtrace:
[<c0225518>] (hex_dump_to_buffer) from [<c0225a8c>] (print_hex_dump+0xa4/0x118)
[<c02259e8>] (print_hex_dump) from [<c01ca444>] (ubifs_dump_node+0x97c/0xbe0)
[<c01c9ac8>] (ubifs_dump_node) from [<c01a8224>] (ubifs_check_node+0x1c0/0x308)
[<c01a8064>] (ubifs_check_node) from [<c01af8e4>] (ubifs_scan_a_node+0xd0/0x1f4)
[<c01af814>] (ubifs_scan_a_node) from [<c01c1f80>] (ubifs_recover_leb+0x578/0x7e0)
[<c01c1a08>] (ubifs_recover_leb) from [<c01b11f0>] (ubifs_replay_journal+0xdd0/0x1540)
[<c01b0420>] (ubifs_replay_journal) from [<c01a5adc>] (ubifs_mount+0x1190/0x192c)
[<c01a494c>] (ubifs_mount) from [<c00d9bdc>] (mount_fs+0x14/0x40)
[<c00d9bc8>] (mount_fs) from [<c00f1bf4>] (vfs_kern_mount+0x50/0xf8)
[<c00f1ba4>] (vfs_kern_mount) from [<c00f4cc4>] (do_mount+0x1a8/0xc40)
[<c00f4b1c>] (do_mount) from [<c00f5acc>] (SyS_mount+0x7c/0xa8)
[<c00f5a50>] (SyS_mount) from [<c000a4a0>] (ret_fast_syscall+0x0/0x3c)
Code: 02a0cee5 cf00000a 010054e1 d100003a (0130f7e5)
[BrcdSoftlockup]: BUG: soft lockup - CPU#0 stuck for 524s! [mount:565]
---[ end trace a6e623cfc8e5011c ]---
note: mount[565] exited with preempt_count 1
Segmentation fault
Mounting Config partition failed, non-recoverable file system corruption
Reformatting the flash, please download config and keys again ...
ubidetach: error!: cannot detach mtd2
error 16 (Device or resource busy)
ubiformat: error!: please, first detach mtd2 (/dev/mtd2) from ubi0
Formatting Doneubi0 error: ubi_attach_mtd_dev: mtd2 is already attached to ubi0
ubiattach: error!: cannot attach mtd2
error 17 (File exists)
ubimkvol: error!: UBI device does not have free logical erasebloubi1: attaching mtd3
cks
!!!ERROR:ubimkvol failed for config partition
ubi1: scanning is finished
ubi1: attached mtd3 (name "resources", size 512 MiB)
ubi1: PEB size: 1048576 bytes (1024 KiB), LEB size: 1040384 bytes
ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
ubi1: good PEBs: 504, bad PEBs: 8, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 677597375
ubi1: available PEBs: 0, total reserved PEBs: 504, PEBs reserved for bad PEB handling: 32
ubi1: background thread "ubi_bgt1d" started, PID 582
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 586
UBIFS (ubi1:0): recovery needed
UBIFS (ubi1:0): recovery completed
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "resources"
UBIFS (ubi1:0): LEB size: 1040384 bytes (1016 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
UBIFS (ubi1:0): FS size: 476495872 bytes (454 MiB, 458 LEBs), journal size 23928832 bytes (22 MiB, 23 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8068C335-3096-4AA2-983E-4659B278DEBA, small LPT model
UBIFS (ubi1:0): full atime support is enabled.
Resource partition is mounted!!
Restore is Done
Kernel crashdump is disabled.
Backup is fine
dma_mem_base: 0x96000000, dma_mem_len: 0x8000000, warm_mem_base: 0x9f500000, warm_mem_len: 0xb00000
Creating TUN device
Starting TPM Infra
Group tss and User tss created
kernel.hostname = localhost
hostname set to localhost
Starting TCSD Daemon
TCSD Up and Running
Enabling time stamp.
Starting the FastIron.
USER=root
HOME=/
GCOV_PREFIX=/fast_iron
ethaddr=78:a6:e1:2e:48:29?
TERM=vt102
PATH=/sbin:/usr/sbin:/bin:/usr/bin
crashkernel=64M@0x70000000
ip=192.168.0.210:192.168.0.14::255.255.255.0:MN:eth0:off
SHELL=/bin/sh
PWD=/
i2c-0 i2c Broadcom iProc I2C adapter I2C adapter 2
i2c-1 i2c Broadcom iProc I2C adapter I2C adapter 2
!!!WARNING: Unable to read Filesystem information!!!
Total no. of blocks in FS = 0
Total no. of free blocks = 0
FIPS Disabled:PORT NOT DISABLED
platform type 90
OS>
Loaded Image SPR08080e from Pri Built on (UTC): Tue Apr 9 10:25:33 2019
Enabling Console Logging
flash_file=0.
Upgrade from pre 8.0.80 image. Dual mode to VLAN config upgrade needed
Hotplugger Daemon Initialized ..
External USB disk is not mounted or plugged in.
set_board_level: gi_board_type = 116[ 628.362222] linux-kernel-bde: map phys range 0x3200000-0x3240000 to 0xb0d09000-0xb0d49000
[ 628.544467] linux-kernel-bde: map phys range 0x88100000-0x90100000 to 0xa8c00000-0xb0c00000
DMA pool size: 134217728
PHY Reset De-asserted
sw_pp_sdk_init:137 ToR init
SOC unit 0 attached to PCI device BCM56160_B0
Firmware version from File: 2.1.1
Pre Parsing Config Data ...
Done with Pre-allocating nexthop id's for Unicast & Openflow