I think all LSI920X-xx HBA controllers are IT from factory
All LSI921X-xx HBA controllers are IR from factory
All LSI921X-xx HBA controllers are IR from factory
ThisThat was not my suggestion atall. I see absolutely no advantage in buying a 'real' 9211 and an M1015 as a spare. Just get the cheaper one and if you are concerned about not having a warranty then buy another one as a spare.
Paying a >200% premium just to have the original LSI box is just silly.
Had the same issue in my P55 FTW and so glad I found this post as I might have otherwise thought I bricked it. Tried it in an old HP Core 2 Duo desktop at work but it didn't like that either (and megarec gave a wonderful message about destroyed memory blocks in that box). Finally successfully flashed to LSI IR in an older HP Proliant server in our testlab there.This card simply is not flashable in my intended system (Asus p5w-dh deluxe) which is ok because it did finally flash 100% ok and tested working fine in my asus maximus extreme.
Does it have the error with IBM's Latest FW ?Anyone gotten this card to work in Windows Server 2012 R2? I'm getting an I/O Adapter hardware error in device manager using the latest LSI9240 firmware.
Yes that's what I flashed the card with.Does it have the error with IBM's Latest FW ?
I'm trying to run an 8-disk RAID10 array though. I can't do that in IR mode can I?I got them working with 2012 R2 cross flashed in both IT and IR mode using the 9211-8i firmware.