I've found a supplier that sells heat sinks which I think will be a better option for the 9361-8i, they are a 26 fin heat sink with a 10mm base and an overall height of 28mm, they are 80mm long and have a width of 31mm, an eyeball comparison shows them looking identical in size but longer than the existing sink with thicker fins and longer.
I am going to get a couple professionally polished up after having them C.N.C drilled and create a fan mounting shroud for them which blocks of the back of the sink so that the heat can only travel towards the exhaust on the case.
Here is a pic of the raw sink with some approximate measurements as I didn't have my micrometer handy.
I am going to get a couple professionally polished up after having them C.N.C drilled and create a fan mounting shroud for them which blocks of the back of the sink so that the heat can only travel towards the exhaust on the case.
Here is a pic of the raw sink with some approximate measurements as I didn't have my micrometer handy.