C:\Program Files\SanDisk\Fusion ioMemory VSL\3.2.15.1699\Driver\fio-utils>fio_pc
i_check
This utility directly probes the pci configuration ports.
There are possible system stability risks in doing this.
Do you wish to continue [y/n]? y
Root Bridge PCIe 18750 MB/sec needed max
Intel(R) Xeon(R)-áE7 v2/Xeon(R) E5 v2/Core i7 DMI2 - 0E00
Bridge 0000:40:02.00 (41-41) (8086:0e04)
Intel(R) Xeon(R)+é-áE7 v2/Xeon(R) E5 v2/Core i7 PCI Express Root Port 2a -
0E04
Needed 2000 MB/sec Avail 2000 MB/sec
* Correctable Error(s): Detected
Clearing Errors
ioDrive 0000:41:00.0 (2001) Firmware 116786
Fusion ioMemory VSL Device
Slot Power limit: 75.0W (75000mw)
C:\Program Files\SanDisk\Fusion ioMemory VSL\3.2.15.1699\Driver\fio-utils>fio_st
atus -V
Found 1 ioMemory device in this system
Driver version: 3.2.15 build 1699
Adapter: Single Controller Adapter
Fusion-io ioScale 3.20TB, Product Number:F11-002-3T20-CS-0001, SN:1439D1
5B0, FIO SN:1439D15B0
ioDrive2 Adapter Controller, PN:PA005064001
External Power: NOT connected
PCIe Bus voltage: avg 11.60V
PCIe Bus current: avg 0.92A
PCIe Bus power: avg 10.62W
PCIe Power limit threshold: 24.75W
PCIe slot available power: unavailable
Connected ioMemory modules:
fct0: Product Number:F11-002-3T20-CS-0001, SN:1439D15B0
fct0 Attached
ioDrive2 Adapter Controller, Product Number:F11-002-3T20-CS-0001, SN:143
9D15B0
ioDrive2 Adapter Controller, PN:PA005064001
SMP(AVR) Versions: App Version: 1.0.20.0, Boot Version: 1.0.6.1
Located in slot 0 Center of ioDrive2 Adapter Controller SN:1439D15B0
Powerloss protection: protected
PCI:41:00.0, Slot Number:4
Vendor:1aed, Device:2001, Sub vendor:1aed, Sub device:2001
Firmware v7.1.17, rev 116786 Public
3200.00 GBytes device size
Format: v500, 781250000 sectors of 4096 bytes
PCIe slot available power: 75.00W
PCIe negotiated link: 4 lanes at 5.0 Gt/sec each, 2000.00 MBytes/sec tot
al
Internal temperature: 51.19 degC, max 51.19 degC
Internal voltage: avg 1.02V, max 1.02V
Aux voltage: avg 2.48V, max 2.48V
Reserve space status: Healthy; Reserves: 100.00%, warn at 10.00%
Active media: 100.00%
Rated PBW: 20.00 PB, 76.57% remaining
Lifetime data volumes:
Physical bytes written: 4,686,697,557,597,560
Physical bytes read : 4,522,346,986,201,200
RAM usage:
Current: 150,739,328 bytes
Peak : 150,739,328 bytes
Contained VSUs:
fct0: ID:0, UUID:8e28d28c-c036-4b9a-95d0-455daff7e65b
fct0 State: Online, Type: block device
ID:0, UUID:8e28d28c-c036-4b9a-95d0-455daff7e65b
3200.00 GBytes device size
Format: 781250000 sectors of 4096 bytes
C:\Program Files\SanDisk\Fusion ioMemory VSL\3.2.15.1699\Driver\fio-utils>fio_up
date_iodrive.exe fusion_3.2.11-20150618.fff
WARNING: DO NOT TURN OFF POWER OR RUN ANY IODRIVE UTILITIES WHILE THE FIRMWARE U
PDATE IS IN PROGRESS
Please wait...this could take a while
Updating: [====================] (100%) -
fct0 - successfully updated the following:
Updated the firmware from 7.1.17 rev 116786 to 7.1.17 rev 116786
Updated SMPCTRL from 1.0.20 to 1.0.21
Please reboot this machine to activate new firmware.