$10/TB or less 3, 4, 6 TB SAS drives

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Iaroslav

Member
Aug 23, 2017
111
24
18
37
Kyiv
Ordered 6x3Tb from this seller for 26/each. 4 of them were 100-200TB read and half less of writes, one was 1PB read, and the last one surprisingly a 4TB drive.
Ordered another BO of 6 for 25/each.
 

KarlFranz

New Member
Mar 18, 2019
23
0
1
What I need to use they drive in my home server?

First time with sas drive. Only have sata drive now.

Thank you
 

techtoys

Active Member
Feb 25, 2016
189
50
28
58
What I need to use they drive in my home server?
You need a Raid controller or HBA. The LSI/Avago/Broadcom chip based models are popular here. Read this hardware forum. If you bought the 12G drives like I did you would want a 12G controller which are a bit more expensive. The last 6G cards I bought were pretty cheap and breakout cables are easy to find.

The LSI chips get hot and need proper cooling.
Do you have a backplane? rack server? external das? diy white box?
Depending on your storage solution software/os you may need to flash the card into IT mode.
 
Last edited:

KarlFranz

New Member
Mar 18, 2019
23
0
1
You need a Raid controller or HBA. The LSI/Avago/Broadcom chip based models are popular here. Read this hardware forum. If you bought the 12G drives like I did you would want a 12G controller which are a bit more expensive. The last 6G cards I bought were pretty cheap and breakout cables are easy to find.

The LSI chips get hot and need proper cooling.
Do you have a backplane? rack server? external das? diy white box?
Depending on your storage solution software/os you may need to flash the card into IT mode.
I already have some hba card. But only have 1 to 4 sata cable plug in.

Can I buy some 1 to 4 sas cable or for sas drive its only 1 to 1?

I think it the cable I unable to figure. What I realpy need.
 

techtoys

Active Member
Feb 25, 2016
189
50
28
58
I think it the cable I unable to figure. What I realpy need.
There is a good guide for this written by Patrick.
Link to SAS/SATA Cable guide

Your HBA likely has the older internal SFF-8087 and you just have drives in a plain diy box.
This is very common for beginners. Most of my HBA are like this.
If so, You need SAS to SATA Forward Breakout Cable
Link to example on Amazon

The HBA usually has 1 or 2 SFF-8087 and you would need 1 or 2 cables to support 4 or 8 SAS/SATA drives.
You would need to separtely wire power.

You could also use an SFF-8087 to SFF-8482 x 4 fanout SAS cable.
Link to example.
I use 1 of these in a similar setup and the power molex connector is easy to wire.
 

KarlFranz

New Member
Mar 18, 2019
23
0
1
Thank you for the cable guide. I will learn many thing in this.

Already have some 1 to 4 sata cable.

Just found the 1 to 4 sas cable version . It's 1 to 4 sff-8482.
Thank you.