I want more
Got 10gb up and running.
A few issues here and there that I think are more related to my systems and firewall not the switch.
Thinking of using Layer 3 on here and breaking my servers into a 9000 MTU vlan, and let the switch do the routing.
The strangest thing, the only thing that broke from the upgrade is my Plex server.
Its ESXi virtualization of FreeNAS with a FreeBSD Jail running Plex.
It starts to drop packets over the 10gb link.
* My other jails work fine
* The Plex jail behaves if I switch back to the 1gb link
* The Plex jail also works if I stop the Plex services running on the jail.
It's the very specific combination of everything causing the issue.
I have the 24 port PoE model arriving tomorrow, and I have some Noctua fans arriving today to do a fan swap with.
I have already done extensive testing with the fans. It comes with 40x40x28mm fans and it uses a standard pin out but not a standard connector, so you have to cut off the plastic guide to get aftermarket fans to fit.
It does not complain if you run 3 pin fans, it will complain if you are missing a fan but still runs.
Stock fans wont spin up when using a Noctua LNA to step down the voltage, so I think 3 pin fans are the way to go so you do not need to worry about any PWM issues.