Ok so I am looking for the wisdom of the group here for a switch model recommendation. Does one that fits my desires exist?
My needs:
10GbE SFP+ (other standard 10GbE Fiber may work)
L2+ routing
VLAN ACLs
reasonable power draw (not 100w+)
not $500+ (prefer under $300)
Nice to have:
Cisco (Since I am most comfortable with that)
POE (power draw obviously higher but that is fine)
4+ SFP+ ports
Full L3
I currently have a stack of three Dell 5524 switches which are capable of static routes and that works fine. However they only allow ACLs to be applied to the physical interfaces not the VLAN/SVI. This doesn't work for me. I am running router on a stick with pfSense right now but I would like to do my inter VLAN routing on the switch.
Thanks for any suggestions.
My needs:
10GbE SFP+ (other standard 10GbE Fiber may work)
L2+ routing
VLAN ACLs
reasonable power draw (not 100w+)
not $500+ (prefer under $300)
Nice to have:
Cisco (Since I am most comfortable with that)
POE (power draw obviously higher but that is fine)
4+ SFP+ ports
Full L3
I currently have a stack of three Dell 5524 switches which are capable of static routes and that works fine. However they only allow ACLs to be applied to the physical interfaces not the VLAN/SVI. This doesn't work for me. I am running router on a stick with pfSense right now but I would like to do my inter VLAN routing on the switch.
Thanks for any suggestions.