Hi,
does anyone know how the ini file has to look like for using AdpFactorySettings parameter of MegaSCU? What I know is, that the ini file is different as the output of AdpSettings.
I only have the command line help of MegaSCU and I cannot find more documentation of MegaSCU.
Background
I do have a H310 controller which I would like to crossflash to a LSI 9240-8i and it should run in a DELL poweredge T20.
That card is not shown at all during boot and even in T20 BIOS all PCI slots are shown as empty though I know that the controller works as it should cause it was tested on another mobo.
My guess is that DELL T20 BIOS has a whitelist/blacklist of PCI devices to use because the SUBVENDOR ID of my card is 1F78 (built for DELL Precision Workstations).
I would like to switch the SUBVENDOR ID to 1F4E (built for DELL Poweredge servers) and see, if it is recognized then.
MegaSCU -AdpFactorySettings -SetPciData should be able to manage it as stated in the command line help:
__________________________________________________
MegaSCU -AdpFactorySettings [-SetPciData|-SetMfgData|-SetMfcData|-SetSasAddress]
-f FileName -aN
-SetPciData reads INI file and sets FW PCI related data like Vendor ID, Device ID etc.
-SetMfgData reads INI file and updates FW manufacturing data like manufacturing data, revision, etc.
-SetMfcData reads INI file and updates FW manufacturing structure
-SetSasAddress reads INI file and updates SAS Address
_____________________________________________________
My question now is, how should that ini File look like, is there more documentation of MegaSCU available or does anyone have another idea, how I can get the controller to work on DELL T20?
Thanks in advance,
Ingo
does anyone know how the ini file has to look like for using AdpFactorySettings parameter of MegaSCU? What I know is, that the ini file is different as the output of AdpSettings.
I only have the command line help of MegaSCU and I cannot find more documentation of MegaSCU.
Background
I do have a H310 controller which I would like to crossflash to a LSI 9240-8i and it should run in a DELL poweredge T20.
That card is not shown at all during boot and even in T20 BIOS all PCI slots are shown as empty though I know that the controller works as it should cause it was tested on another mobo.
My guess is that DELL T20 BIOS has a whitelist/blacklist of PCI devices to use because the SUBVENDOR ID of my card is 1F78 (built for DELL Precision Workstations).
I would like to switch the SUBVENDOR ID to 1F4E (built for DELL Poweredge servers) and see, if it is recognized then.
MegaSCU -AdpFactorySettings -SetPciData should be able to manage it as stated in the command line help:
__________________________________________________
MegaSCU -AdpFactorySettings [-SetPciData|-SetMfgData|-SetMfcData|-SetSasAddress]
-f FileName -aN
-SetPciData reads INI file and sets FW PCI related data like Vendor ID, Device ID etc.
-SetMfgData reads INI file and updates FW manufacturing data like manufacturing data, revision, etc.
-SetMfcData reads INI file and updates FW manufacturing structure
-SetSasAddress reads INI file and updates SAS Address
_____________________________________________________
My question now is, how should that ini File look like, is there more documentation of MegaSCU available or does anyone have another idea, how I can get the controller to work on DELL T20?
Thanks in advance,
Ingo
Last edited: