I was trying to post on the xpenology forum, but their account confirmation email is taking forever. So, I thought maybe some people here might have some ideas...
I'm trying to test out xpenology with dsm 6.1 in KVM virtual machine. I'm using the Jun's 1.0.2b loader for DSM 6.1 from here:
DSM 6.x.x Loader
I've set the VM to boot off USB storage that is mapped to the DS3617xs image file. And I have the NIC configured to emulate e1000 and connected to a bridge port that all my other VMs connect to get direct access to my lab network. The VM does boot the USB image fine and tries to DHCP an IP address, as can be seen in my dhcp server logs:
Aug 10 16:41:28 mumbai dhcpd: DHCPDISCOVER from 52:54:00:5d:95:65 (Diskstation) via eth0
Aug 10 16:41:28 mumbai dhcpd: DHCPOFFER on 192.168.0.115 to 52:54:00:5d:95:65 (Diskstation) via eth0
But it never really configures that IP address on it's NIC. So, I can't ping that address at all, much less pull up the DSM web gui.
So, I connected to serial console and I see this:
you can see the MAC address matches the DHCP logs, but it has a totally different address.
can anyone help?
I'm trying to test out xpenology with dsm 6.1 in KVM virtual machine. I'm using the Jun's 1.0.2b loader for DSM 6.1 from here:
DSM 6.x.x Loader
I've set the VM to boot off USB storage that is mapped to the DS3617xs image file. And I have the NIC configured to emulate e1000 and connected to a bridge port that all my other VMs connect to get direct access to my lab network. The VM does boot the USB image fine and tries to DHCP an IP address, as can be seen in my dhcp server logs:
Aug 10 16:41:28 mumbai dhcpd: DHCPDISCOVER from 52:54:00:5d:95:65 (Diskstation) via eth0
Aug 10 16:41:28 mumbai dhcpd: DHCPOFFER on 192.168.0.115 to 52:54:00:5d:95:65 (Diskstation) via eth0
But it never really configures that IP address on it's NIC. So, I can't ping that address at all, much less pull up the DSM web gui.
So, I connected to serial console and I see this:
Code:
DiskStation login: root
BusyBox v1.16.1 (2017-02-14 03:57:39 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
DiskStation> ifconfig
eth0 Link encap:Ethernet HWaddr 52:54:00:5D:95:65
inet addr:169.254.189.70 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:763 errors:2 dropped:0 overruns:0 frame:2
TX packets:271 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:68757 (67.1 KiB) TX bytes:85650 (83.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:784 (784.0 B) TX bytes:784 (784.0 B)
can anyone help?