Quanta LB6M (10GbE) -- Discussion

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

Oxzhor

Member
Jan 11, 2017
30
3
8
40
The Netherlands, Amsterdam
I´m having issues with any SFP/SFP+ on LB6M !!!

None of these works....

running lastest version (final 18).

what´s de command to show info about sfp/sfp+ (vendor, rx/tx signal, etc).

Thanks


I use the follow transceivers Finisar FTLX8571D3BCL and there works perfect!
Also i tested AOI A7EL-SN85-ADMA and INTEL E10GSFPSR-SO and works
 

HyperNet

New Member
Mar 19, 2017
5
0
1
I just changed fan to AFB0412LB. It is silent. But the sensors looks strange:
Code:
(FASTPATH Routing) #show environment

Temperature (Celsius).......................... 0
Fan Speed, RPM................................. 2147483647
Fan Duty Level................................. 0%
Temperature traps range: 0 to 45 degrees (Celsius)

Temperature Sensors:
Unit     Sensor  Temperature (Celsius)  State
----     ------  ---------------------  --------------
1        1       0                      Normal

Fans:
Unit   Fan     Type        Speed      Duty level State
----   ------  ----------  --------   ---------- --------------
1      1       Fixed       2147483647           0% Operational
1      2       Fixed       2147483647           0% Operational
1      3       Fixed       2147483647           0% Operational

Power supplies:
Unit     Power supply  Type          State
----     ------------  ----------    --------------
1        1             Removable     Failed
1        2             Removable     Failed
Temperature is 0!!!
 

TheBloke

Active Member
Feb 23, 2017
200
40
28
44
Brighton, UK
I have finally joined this fun little club..



I got the LB6M and also an LB4M to aggregate all my 1GB traffic. In the background: my little Netgear 1G switch looking sad, saying "I can still make you happy! You don't need speed, take things slow and enjoy the journey!"

For anyone looking for an LB6M in the UK or near the UK, I got mine from 3d-systems.co.uk for the really rather good price of £200 including VAT + £10 for next-day UPS delivery. Given they were being sold for $300 (£240) in the US recently, this is rather great. And that's with dual PSUs and rack-ears. The LB4M was only £75 and came with two free SR transceivers.

Those prices were when I was ordering a couple of 10G NICs at the same time, so might be slightly higher for one switch on its own. Note that they don't have the LB6M listed on their site or eBay store, and items they do have listed are anywhere from 50-100% higher priced than they will sell them to home users. You need to contact them for the good pricing.

If anyone does order one, speak to Toby Jennings (toby@) and tell him that TomJ from Brighton sent you :) (I bugged him for several days with a number of questions so I'd like him to know it was worth it ;) )
 

jzeus

New Member
Jan 22, 2017
19
4
3
Anybody uses QPF+ to SPF+ convertor on the LB6M?

I cannot ping Mellanox Connectx-3 VPI HCA through the convertor.
But direct connection of two SPF+ ports via DAC works.

The MAC address of the Mellanox port is displayed with

show mac-addr-table on the switch. I have no idea why I cannot ping it.
 

fjacques

New Member
Dec 13, 2016
4
0
1
54
I got a LB6M and a LB4M , both are ok , the lb6m crashes every week i need to cold power cycle, and all network comes back up, ( its on a prod network)

im runnin 1.2.0.14.. just got .18 in this thread (page-2 or 3) , will this erase my config ? or is it safe to run live ?
 

CappyKD

New Member
Apr 11, 2017
3
1
3
54
I just pickup myself up a sister switch to the Quanta. It's a Delta Broadcom Anatel ET-DT7040. Same os and feature set. Came with the x.x.x.18 FW. This one has hot swap fans in the back and is layed out a bit different but is based on the same chipset and software. I have the same modules as most here. Fastpath Routing and Fastpath QOS. Works perfect with the Finisar sfp+ modules and also the 3m cisco DAC cables that came free with my Mellanox Connect 2 cards. $37 for 2 cards and 2 dacs on flea bay. These switches have rear to front airflow so when mounted as TOR switches, the airflow matches the rest of the equipment in the rack. The switch was $300 delivered. UnixPlusCom is the seller if anyone is interested.

I have two LACP groups configured and working well, one is a trunk group to my Ubiquiti Unifi 48 switch the other is to a Poweredge R510 with 2 mellanox cards running Windows server 2016 datacenter. I have plans to setup a few vlans and vlan routing with LACP groups inside the vlans. I ordered 4 of these to quiet the beast down. (1 spare) Top Motor 40x28mm 12V 9000 rpm PWM fan with connector #DF124028BL-PWMG | Coolerguys

Love the forum, lots of good info.

Thanks,
Kirk
 
Last edited:

CappyKD

New Member
Apr 11, 2017
3
1
3
54
Apparently mine is the exact same physically as a Powerconnect 8024f, based on the pictures I see of the 8024f. It looks like I ordered the wrong fans. The ones I ordered are 4 wire, and the Dell style switch uses 3 wire hot swap fans. I have 4 of the 4 wire style that fit the Quanta if anyone wants them.
 
Last edited:

aj84

Member
Oct 28, 2015
60
27
18
Germany
@CappyKD
Looks interesting...do you mind uploading the fimware and posting some details (e.g. "show version", "show sysinfo", "show environment")?
On ebay they claim the ports support 1GbE - as far as I know the LB6M doesn't (no one had success / no one knows which tranceivers make that possible) -> did you test that with your delta?
 

CappyKD

New Member
Apr 11, 2017
3
1
3
54
@CappyKD
Looks interesting...do you mind uploading the fimware and posting some details (e.g. "show version", "show sysinfo", "show environment")?
On ebay they claim the ports support 1GbE - as far as I know the LB6M doesn't (no one had success / no one knows which tranceivers make that possible) -> did you test that with your delta?



Sorry, I have not tested any 1GBe functionality as I don't have any appropriate gbics. The reseller Unix Surplus has a teardown video now on You-Tube of both the Quanta and the Delta.


Here is the Show Ver, Environment, and Sysinfo. I will upload the FW later tonight or this weekend.



Switch: 1

System Description............................. DNI 7024F, 1.2.0.18, Linux
2.6.21.7
Machine Type................................... DNI 7024F
Machine Model.................................. DNI 7024F
Serial Number.................................. 24DL130220165

FRU Number.....................................
Part Number.................................... BCM56820
Maintenance Level.............................. A
Manufacturer................................... 0xbc00
Burned In MAC Address.......................... 00:30:AB:2A:D6:0B
Software Version............................... 1.2.0.18
Operating System............................... Linux 2.6.21.7
Network Processing Device...................... BCM56820_B0

--More-- or (q)uit


Additional Packages............................ FASTPATH QOS


(FASTPATH Routing) #








(FASTPATH Routing) #show sysinfo

System Description............................. DNI 7024F, 1.2.0.18, Linux
2.6.21.7
System Name....................................
System Location................................
System Contact.................................
System Object ID............................... 1.3.6.1.4.1.4413
System Up Time................................. 1 days 17 hrs 5 mins 22 secs
Current SNTP Synchronized Time................. Not Synchronized

MIBs Supported:

RFC 1907 - SNMPv2-MIB The MIB module for SNMPv2 entities
RFC 2819 - RMON-MIB Remote Network Monitoring Management
Information Base
FASTPATH-REF-MIB FASTPATH Reference
SNMP-COMMUNITY-MIB This MIB module defines objects to help
support coexistence between SNMPv1, SNMPv2,
and SNMPv3.
SNMP-FRAMEWORK-MIB The SNMP Management Architecture MIB
SNMP-MPD-MIB The MIB for Message Processing and
Dispatching

--More-- or (q)uit


MIBs Supported:

SNMP-NOTIFICATION-MIB The Notification MIB Module
SNMP-TARGET-MIB The Target MIB Module
SNMP-USER-BASED-SM-MIB The management information definitions for
the SNMP User-based Security Model.
SNMP-VIEW-BASED-ACM-MIB The management information definitions for
the View-based Access Control Model for SNMP.
USM-TARGET-TAG-MIB SNMP Research, Inc.
FASTPATH-POWER-ETHERNET-MIB Fastpath Power Ethernet Extensions MIB
POWER-ETHERNET-MIB Power Ethernet MIB
SFLOW-MIB sFlow MIB
FASTPATH-ISDP-MIB Industry Standard Discovery Protocol MIB
LAG-MIB The Link Aggregation module for managing
IEEE 802.3ad
RFC 1213 - RFC1213-MIB Management Information Base for Network
Management of TCP/IP-based internets: MIB-II
RFC 1493 - BRIDGE-MIB Definitions of Managed Objects for Bridges
(dot1d)
RFC 2674 - P-BRIDGE-MIB The Bridge MIB Extension module for managing
Priority and Multicast Filtering, defined by
IEEE 802.1D-1998.
RFC 2674 - Q-BRIDGE-MIB The VLAN Bridge MIB module for managing
Virtual Bridged Local Area Networks

--More-- or (q)uit


MIBs Supported:

RFC 2737 - ENTITY-MIB Entity MIB (Version 2)
RFC 2863 - IF-MIB The Interfaces Group MIB using SMIv2
RFC 3635 - Etherlike-MIB Definitions of Managed Objects for the
Ethernet-like Interface Types
FASTPATH-SWITCHING-MIB FASTPATH Switching - Layer 2
FASTPATH-INVENTORY-MIB Unit and Slot configuration.
FASTPATH-PORTSECURITY-PRIVATE-MIB Port Security MIB.
IEEE8021-PAE-MIB Port Access Entity module for managing IEEE
802.1X.
FASTPATH-RADIUS-AUTH-CLIENT-MIB FastPath Radius MIB
RADIUS-ACC-CLIENT-MIB RADIUS Accounting Client MIB
RADIUS-AUTH-CLIENT-MIB RADIUS Authentication Client MIB
FASTPATH-CAPTIVE-PORTAL-MIB FastPath Captive Portal MIB
FASTPATH-MGMT-SECURITY-MIB The Private MIB for FastPath Mgmt Security
IANA-ADDRESS-FAMILY-NUMBERS-MIB The MIB module defines the
AddressFamilyNumbers textual convention.
RFC 1724 - RIPv2-MIB RIP Version 2 MIB Extension
RFC 1850 - OSPF-MIB OSPF Version 2 Management Information Base
RFC 1850 - OSPF-TRAP-MIB The MIB module to describe traps for the
OSPF Version 2 Protocol.
RFC 2787 - VRRP-MIB Definitions of Managed Objects for the
Virtual Router Redundancy Protocol

--More-- or (q)uit


MIBs Supported:

FASTPATH-ROUTING-MIB FASTPATH Routing - Layer 3
FASTPATH-QOS-MIB FASTPATH Flex QOS Support
FASTPATH-QOS-ACL-MIB FASTPATH Flex QOS ACL
FASTPATH-QOS-COS-MIB FASTPATH Flex QOS COS
FASTPATH-QOS-AUTOVOIP-MIB FASTPATH Flex QOS VOIP
FASTPATH-QOS-DIFFSERV-PRIVATE-MIB FASTPATH Flex QOS DiffServ Private MIBs'
definitions
FASTPATH-QOS-ISCSI-MIB FASTPATH Flex QOS iSCSI Flow Acceleration
MIBs' definitions

(FASTPATH Routing) #


(FASTPATH Routing) #
(FASTPATH Routing) #show environment

Temp (Celsius)................................. 33
Fan Speed, RPM................................. 9420
Fan Duty Level................................. 0%
Temperature traps range: 0 to 45 degrees (Celsius)

Temperature Sensors:
Unit Sensor Description Temp (Celsius) State
---- ------ ---------------- -------------- --------------
1 1 CPU 33 Normal
1 2 MAC 42 Normal
1 3 Left PHY 47 Normal
1 4 Right PHY 42 Normal

Fans:
Unit Fan Type Speed Duty level State
---- ------ ---------- -------- ---------- --------------
1 1 Removable 9420 0% Operational
1 2 Removable 9420 0% Operational
1 3 Removable 9480 0% Operational

Power supplies:
Unit Power supply Type State
---- ------------ ---------- --------------
1 1 Removable Operational
1 2 Removable Operational


(FASTPATH Routing) #
 
  • Like
Reactions: fvanlint

YueLuo

New Member
Apr 5, 2017
7
0
1
37
Guangzhou China
Anyone had luck with LACP-LAG between this and a Huawei switch?
I have two Huawei S5700S-28X-LI-AC's , both configured with LACPs(default vlan 1, untagged).
I also configured LACP-LAG on LB6M using the following commands:

Code:
interface 0/23
addport 1/1
exit
interface 0/24
addport 1/1
exit
interface 1/1
no port-channel static
vlan participation include 1
exit
The LACP-LAG works between the two S5700S's but not when I connect either to LB6M. I wonder what I missed ?
 

cstone94

New Member
Feb 20, 2017
11
0
1
29
Can I get someone to remote onto my PC and set this switch up to work line a normal switch? I just want it to communicate with my 1GBE network and have 3 runs off of the LB6M to a File Server and another Server.
 

Drewy

Active Member
Apr 23, 2016
208
56
28
54
Can I get someone to remote onto my PC and set this switch up to work line a normal switch? I just want it to communicate with my 1GBE network and have 3 runs off of the LB6M to a File Server and another Server.
That should work without any setup. Have you tried?