The cell razvanc.mobile uses is a protected cell compared to the raw cells used as default by Lsi, as Terry Kennedy says it should be safe as long as the internal protection in the battery itself is working but it is not a solution most will use as the thermistor now cannot throttle charging/discharging.
To minimize the heat for the raid battery I bought the interposer board and cable to mount pack away from the 60C raid heatsink, normally pack is around 40-45 in my desktop which is way to hot.
@razvanc.mobile - did you try to calibrate pack after replacement and did eprom correct itself ? did 'full capacity' increase to new pack capacity ?
To minimize the heat for the raid battery I bought the interposer board and cable to mount pack away from the 60C raid heatsink, normally pack is around 40-45 in my desktop which is way to hot.
@razvanc.mobile - did you try to calibrate pack after replacement and did eprom correct itself ? did 'full capacity' increase to new pack capacity ?