I am in the middle of implementing my new network design posted below. I am only implementing the core switch and internal LAN portion of the design right now. The DMZ portion is out of scope of this discussion. In the diagram posted, I have a core switch (LB6M) with vlan 1, 10, and 20. Actually the LB6M is a layer 3 switch capable of inter-vlan routing. The edge/access switches (Juniper EX3300) contain other vlans as well.
I would like to keep all the inter-vlan routing done on 1 switch (either Quanta LB6M or Juniper EX3300).
Please advise on whether you would use the Quanta or Juniper switch for inter-vlan routing for all vlans on the core and edge switches. Based on your feedback, I will ask some follow-up questions.
I would like to keep all the inter-vlan routing done on 1 switch (either Quanta LB6M or Juniper EX3300).
Please advise on whether you would use the Quanta or Juniper switch for inter-vlan routing for all vlans on the core and edge switches. Based on your feedback, I will ask some follow-up questions.
Last edited: