Starting a thread to verify the Intel Xeon L5520 numbers here.
Looking for some folks with dual LGA1366 platforms to test single and dual L5520 configurations. This is a follow-up from the earlier forum post http://forums.servethehome.com/proc...-v-dual-intel-xeon-l5530-how-much-faster.html and the http://www.servethehome.com/value-recycling-dual-intel-xeon-l5530-l5630-cloud-comparison/ article.
I'm looking to get a few data points from non-Dell C6100 servers on the L5520's if possible.
What's required:
Single or dual socket configuration with 3x DIMMs per CPU
Ubuntu 12.04 LTS installation and update/ install via the following command:
Hardinfo
Looking for some folks with dual LGA1366 platforms to test single and dual L5520 configurations. This is a follow-up from the earlier forum post http://forums.servethehome.com/proc...-v-dual-intel-xeon-l5530-how-much-faster.html and the http://www.servethehome.com/value-recycling-dual-intel-xeon-l5530-l5630-cloud-comparison/ article.
I'm looking to get a few data points from non-Dell C6100 servers on the L5520's if possible.
What's required:
Single or dual socket configuration with 3x DIMMs per CPU
Ubuntu 12.04 LTS installation and update/ install via the following command:
Output from the following commands (from a fresh installation):sudo apt-get update && sudo apt-get upgrade -y && sudo apt-get install build-essential libx11-dev libglu-dev hardinfo crafty phoronix-test-suite -y
Hardinfo
UnixBench 5.1.3hardinfo | less | tee hardinfo.txt
c-ray 1.1wget https://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz && tar -zxvf UnixBench5.1.3.tgz && cd UnixBench && time make && wget http://forums.servethehome.com/pjk/fix-limitation.patch && patch Run fix-limitation.patch && ./Run dhry2reg whetstone-double syscall pipe context1 spawn execl shell1 shell8 shell16 && cd ..
craftywget http://www.futuretech.blinkenlights.nl/depot/c-ray-1.1.tar.gz && tar -zxvf c-ray-1.1.tar.gz && cd c-ray-1.1 && make && cat scene | ./c-ray-mt -t 32 -s 7500x3500 > foo.ppm | tee c-ray1.txt && cat sphfract | ./c-ray-mt -t 32 -s 1920x1200 -r 8 > foo.ppm | tee c-ray2.txt && cd ..
pts testscrafty bench
If you are looking for prompt answers you can use the following sequence: y n n 5 nphoronix-test-suite benchmark pts/stream pts/compress-7zip pts/openssl pts/pybench