I am at the end of my rope here... I am looking for what I need to bridge/connect on a damn Ac-063-2 power backplane to make the damn PSU's power on. This is on a P4500 G2 / DL180 G6.
There is no pinout of this side of the equation. The front panel has a pinout, but the PDB side does not. I plan on running a Super Micro X9DR3-LN4F+ instead of the old motherboard and would like to put it in a normal computer case for noise reasons, and because I am slapping on some 212evos on the processors. My biggest hurdle is this damn PDB. I have confirmed that the old mobo does get power and passes it through as the fans go 100% upon starting, but nothing I bridge or do turns on those damn PSU's. The cable is the bottom left one in this picture. There is a white wire with a blue dot on it, which I thought went with PWR ON as for the front panel, PWR is a blue wire, but shorting it to ground is a no-go. Any thoughts on the matter would be greatly appreciated. If you are local to Tampa, FL and would like to take a stab at it in person, let me know.
also before anyone says it, yes I did bridge the green and black on the 24pin - no dice. I know HP supplies can be weird with starting up. In it now are 2x DPS-750RB
side note, if anyone knows a proper (CHEAP!) ATX tower that fits this damn EE-ATX motherboard, I would be so appreciative
There is no pinout of this side of the equation. The front panel has a pinout, but the PDB side does not. I plan on running a Super Micro X9DR3-LN4F+ instead of the old motherboard and would like to put it in a normal computer case for noise reasons, and because I am slapping on some 212evos on the processors. My biggest hurdle is this damn PDB. I have confirmed that the old mobo does get power and passes it through as the fans go 100% upon starting, but nothing I bridge or do turns on those damn PSU's. The cable is the bottom left one in this picture. There is a white wire with a blue dot on it, which I thought went with PWR ON as for the front panel, PWR is a blue wire, but shorting it to ground is a no-go. Any thoughts on the matter would be greatly appreciated. If you are local to Tampa, FL and would like to take a stab at it in person, let me know.
also before anyone says it, yes I did bridge the green and black on the 24pin - no dice. I know HP supplies can be weird with starting up. In it now are 2x DPS-750RB
side note, if anyone knows a proper (CHEAP!) ATX tower that fits this damn EE-ATX motherboard, I would be so appreciative