My ESX 6.5 vhost is running out of space. I thought using ZFS in past, swap smaller drives with bigger allow to resilver and keep replacing drives and it's done. Well....not sure my HP Proliant can....anyone with experience?
I have a HP Proliant G6 DL380 w/ (5) 146gb SAS drives (RAID5) on...
Running OmniOS on a SuperMicro box w/ 6 600GB SAS drives (zPool) as ISCSI target. My XenServers both report only 250MB in use (I moved all my VM's off to clear snapshots) however keep getting emails from the server ZFS is near capacity which I know it's not. I read somewhere the only recourse...
I get this when logging into FreeNas below, however, everything "appears" healthy.
Build FreeNAS-9.3-STABLE-201508250051
Hardware: SuperMicro,
CRITICAL: Device: /dev/ada7, 10 Currently unreadable (pending) sectors
CRITICAL: Device: /dev/ada7, 10 Offline uncorrectable sectors
CRITICAL...
Running Napp-IT (thanks Gea), I'm curious on the thoughts on the following DD Benchmark?
Memory size: 32767 Megabytes
write 12.8 GB via dd, please wait...
time dd if=/dev/zero of=/ISCSI/dd.tst bs=2048000 count=6250
6250+0 records in
6250+0 records out
12800000000 bytes transferred in...
Subject says it all. Server built, detailed here . Added (4) more identical SAS Drives to expand
2014-06-17.13:34:13 zpool add ISCSI raidz2 c9t50000C0F01DE465Ed0 c10t50000C0F01299476d0 c11t50000C0F01DE3792d0 c12t50000C0F01DE37AEd0
About 4:59pm that same day, my Xenservers started texting...
My server build using LSI 9211-8 controller. I'm not seeing the same performance that others have posted. Should this be better?
4 - SAS WD 600GB
1 - Intel s3700 120GB SSD
pool: ISCSI
state: ONLINE
status: The pool is formatted using a legacy on-disk format. The pool can...
Upgraded a 3 year old Dual Quadcore 12 bay SuperMicro box over this past weekend. Added 64GB RAM, added a LSI SAS 9211-8i HBA next to an existing SuperMicro SATA Card. The bottom shelf of the chassis is SATA (4) wide. Bay 1 & 2 are controlled by the on-board SATA controller while 3 & 4 are...
Hi all.
Looking for some advice. I have a couple 2 U SuperMicro Chassis that is in the process of being retrofitted with new drives. I'd like to install (4) SSD drives 2 OS-Mirror (OmniOS) and 1 for Zil & 1 for L2Arc. Problem is, I don't know where to put these SSD's without using a...
Hi guys, new to forum. We're in the process of building out our cabinet and was concerned with enabling Jumbo Frames on our switches that serves multiple devices and roles. I'd enjoy some input and some validation. We have (2) true stacked switches via HDMI cables. We're creating (5) VLANS...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.