So as a reference point I have a i9-12900K in an ASUS Prime Z690-P with non-ECC DDR5 memory, but obviously has the standard on-die ECC that all DDR5 has. I ran dmidecode just to see what it would look like:
dmidecode -t memory
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 3.4.0...
I still haven't seen a board that I really like. I built a (temp) system around the consumer Asus Prime Z690-P and none of these new W680 boards have as good of IO options in my mind. That board has:
3x PCIe 4.0 x4 M2 (one direct from processor)
1 x PCIe 5 x16 (off processor)
1 x PCIe 4.0...
No, TB is ThunderBolt (or USB4 these days). But it could theoretically handle multiple monitors and USB3 connections over a single cable.
I'm not aware of any products that can route over IP without compromises in both latency and/or fidelity. Just that single 4k stream I'm sending is 18...
I agree TB over fiber is likely the only reasonable approach for the scale you're looking at.
I recently did something similar at a much smaller scale, single 4k screen at 60Hz and USB2 only accessories (keyboard, track pad, web cam, yubikey). It's working great at ~32m. Used these:
For...
Sounds like something caused your ZFS volumes to become unmounted but something else wrote there. I'd try clearing out the /data directory and running the mount command again.
Cloudflare (and others) supports DNS over TLS on port 853 on 1.1.1.1:
https://developers.cloudflare.com/1.1.1.1/dns-over-tls/
If that's blocked you can move to DoH (DNS over HTTPS) but I'm not sure if pfSense supports it. Cloudflare and others run that on port 443 which is almost certainly not...
Having just built a 20.04 box and wanting to leverage the new ZFS root file system options built-in I'll let you know a few quick things. The root on ZFS is only available using the Desktop installer, it is not available on the Server one. You must use UEFI boot. And there is no way in the...
If you have GUI installed this should do it:
Suspend Ubuntu 18.04 LTS Desktop Automatically After Inactivity | Website for Students
Not sure how to set it up via cli.
I found NetApp was pretty easy to pick up if you have other storage experience. There are a range of NetApp products these days but I'd assume the job you reference is looking for OnTap experience which is their classical NAS/SAN offering. NetApp has a decent number of labs and simulators but...
The USG have fairly limited set of options but more and more things get added in each release. The nice thing is if you’re reasonably technical you can implement just about anything that’s supported on their much more capable Edge Routers on the USG. You need to do the configs manually then drop...
Look for the bestbuy deal on Black Friday. 8TB WD externals for $129. Inside are nice white labeled copies of the reds. Identical except for 3.3v pin feature which depending on your NAS might mean you tape a pin on each drive.
They are white labels that seem to be identical in every way with the exception of having the 3v feature (which means depending on your situation you may need to tape a pin or use adapter to power them).
A z3 obviously gives you great redundancy. Performance wise for non-sequential stuff you wouldn’t see much more than one disks worth of performance (unless you add other cache options). Similar to hardware raid you’d get the best performance with a stripe across 4 mirrors but then you can only...
Are you looking to optimize for performance, available space, or redundancy?
Likely the easiest is to throw all 8 disks into a single z2 vdev. Gives you space of 6 disks and lets 2 fail.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.