sic0048's latest activity
-
Ssic0048 replied to the thread fast WiFi7 Router/AP.The WiFi 7 standards are complete and devices can now be officially "WiFi 7 Certified". At this point, the official ratification is...
-
Ssic0048 replied to the thread fast WiFi7 Router/AP.I'm assuming it's because there is no real IT Professional handling this network and the person in charge of replacing the equipment is...
-
Ssic0048 reacted to jode's post in the thread Brocade ICX Series (cheap & powerful 10gbE/40gbE switching) with
Like.
If I understand you correctly, you have two 6450 switches in your LAN and they are connected via a 10gb link. To simplify configuration... -
Ssic0048 replied to the thread GiGaPlus - 8* 2.5G Base-T Ports, 2* 10G SFP+ Ports. (USA?).2 of the 3 are unmanaged. I would certainly pass on those....... With more and more WiFi access points offering 2.5gb ports, the most...
-
Ssic0048 replied to the thread (New to) PFsense: Vlan tagging on bridge, how?.It seems pretty cut and dry. DHCP on the VLANs and not on the bridge. You'll have to add the firewall rules per the directions in your...
-
Ssic0048 replied to the thread 10GB Network Setup with Lenovo m720q OPNsense Router and CAT5E Cables?.As long as the devices are on the same network segment, data passing between the devices will be routed at the switch level. Even if...
-
Ssic0048 replied to the thread 10GB Network Setup with Lenovo m720q OPNsense Router and CAT5E Cables?.Cat5e is not rated for 10gb at any distance. However it might actually work at 10gb in ideal conditions (ie short runs, the wire is in...
-
Ssic0048 replied to the thread CWWK/Topton/... Nxxx quad NIC router.The virtualization question really comes down to personal preference. For me, I would not virtualize unless I had a system that could...
-
Ssic0048 replied to the thread Help with SFP(+).If you are really moving such large files across your network that faster than 1gb is worth it, then go straight to 10gb. But the truth...
-
Ssic0048 replied to the thread Help setting up D Link N6850U for access point..Some routers have a "WiFi Access Point" mode that turns off all the "routing" functions and allows you to use the device as just an AP...
-
Ssic0048 replied to the thread Help with SFP(+).Don't confuse what is going on in the consumer market as "cutting edge." 10gb came out in 2002. It's so old that companies have been...
-
Ssic0048 replied to the thread Me again - another hopeful simple question - just trying to learn.You first have to understand what "Layer 2" and "Layer 3" really are referring to. I'm not IT Professional but layer 2 is routing done...
-
Ssic0048 replied to the thread Help with SFP(+).I'm sure you are aware, but none of those devices actually support speeds faster than gigabit ethernet. Well, the Asus XT8 has a 2.5gb...
-
Ssic0048 replied to the thread 10GB managed switch and Router selection help.First, let me say that you can do a lot of 10gb upgrades without needing to replace your current router. Even with layer 2 switches...
-
Ssic0048 replied to the thread Ruckus Wireless as an Unifi alternative?.It's for your protection. If you make a change that breaks your network and prevents you from accessing the device to correct it, all...